Sfp Installation In Sfp Media Module - Siemens SIMATIC NET SCALANCE X-300M Compact Operating Instructions

5.6.2

SFP installation in SFP media module

NOTICE
Use only approved SFPs
If you use SFPs that are not approved by Siemens AG, there is no guarantee that the device will
function according to the specification.
If you use unapproved SFPs, this can lead to the following problems:
• Damage to the device
• Loss of the approvals
• Violation of the EMC regulations
Use only approved SFPs.
You can insert or remove the SFP during ongoing operation.
Inserting an SFP
Note
Only the media module MM992-2SFP may be fitted with approved SFPs. The SFP media module
can be fitted with up to two SFPs.
Device:
Media module
MM992-2SFP
(SFP media module)
SCALANCE X-300M
Compact Operating Instructions, 05/2023, A5E02630801-14
Variant [Article number]
Labeling on the device
2 x 100/1000 Mbps [6GK5 992-2AS00-8AA0]
9922AS
Installation and disassembly
5.6 Installation of modular devices
Figure
41