Table of Contents
Advertisement
12
model no.
| contact us: 1.866.523.5218
060-3775-4
•
With gate open, align tabs on vacuum tube with opening inside gate. (Fig. 3)
A
Vacuum tube aligning tab
B
Vacuum tube locking tab
•
With assembled vacuum tube properly aligned, insert into aligned gate opening and
lock vacuum tube into place. Make certain the vacuum tube aligning tab is firmly
"seated" before locking the latch. (Fig. 4)
B
A
Fig. 3
Fig. 4
model no.
| contact us: 1.866.523.5218
060-3775-4
•
Add collection bag by simply aligning the plastic connector sleeve on the bag to the
blower exhaust. (Fig. 5)
•
While standing in the operating position adjust the length to fit the operator's size.
Pull the tab to lengthen, pull the strap to shorten. (Fig. 6)
Fig. 5
Fig. 6
13
Hide quick links:
Advertisement
Table of Contents
