Appendix D: Standards-Based Technology - Avocent AutoView AutoView Wireless Switch Installer/User Manual

Autoview wireless switch user guide

Table of Contents

Appendices

Appendix D: Standards-based Technology

The AutoView Wireless transmitter and receiver utilize a proprietary design based on the

802.11a standard. The IEEE 802.11a standard is an extension of the 802.11b standard. It

increases the data rate up to 54 Mbps within the 5 GHz band, utilizing Orthogonal Frequency

Division Multiplexing (OFDM) technology.

This technology works by transmitting high-speed digital data over a radio wave utilizing OFDM

technology. OFDM works by splitting the radio signal into multiple smaller sub-signals that are

then transmitted simultaneously at different frequencies to the receiver. OFDM reduces the amount

of crosstalk (interference) in signal transmissions.

Table of Contents

Do you have a question about the AutoView AutoView Wireless Switch and is the answer not in the manual?

Autoview wireless