Table of Contents
Advertisement
18
AutoView Wireless Installer/User Guide
Figure 4.2: Editing an AES Key
WARNING: Incorrectly changing AES keys can cause transmitters to cease communications.
To delete an EID and AES key from the list:
1.
Disconnect from the transmitter if you are currently connected.
2.
From the AESKey menu, click the EID that you wish to delete.
3.
Click Delete.
NOTE: A receiver may save a maximum of 32 EIDs and associated AES keys in FLASH memory. If the list is full,
the user must delete an unused EID to allow a new EID and AES key to be saved.
Advertisement
Table of Contents
Need help?
Do you have a question about the AutoView AutoView Wireless Switch and is the answer not in the manual?
Questions and answers