Search Mode - Pioneer DVR-940HX-S Operating Instructions Manual

Playback

Search Mode

A L L
The Search Mode feature lets you start
playback from a specified point in a disc by
1
time or by title/chapter/folder/track
number.
ENTER
1 Select 'Search Mode' from
the Play Mode menu, then choose a
search option.
The available search options depend on the
type of disc.
2 Enter a title/chapter/folder/
track number or a search time.
Play Mode
Search Mode Time Search
A-B Repeat
Title Search
Repeat
Chapter Search
Program
Time Search (HDD, DVD): For example, for 25
minutes into the current title, press 2, 5, 0,
0. For 1 hour and 15 minutes and 20 seconds
into the title, press 1, 1, 5, 2, 0.
Time Search (Video CD): For example, for
2 minutes and 30 seconds into the current
track, press 2, 3, 0.
Title/Chapter/Folder/Track Search: For
example, for track 6, press 6.
3 Start playback.
ENTER
Note
1 When using time search, playback may occasionally start slightly before or after the time you input.
2 If you switch camera angles on a DVD during A-B repeat play, A-B repeat is canceled.
A-B Repeat
DVD HDD
The A-B Repeat function allows you to
specify two points (A and B) within a track or
title that form a loop which is played over
and over.
1
Repeat' from the Play Mode menu.
2
highlighted, press at the point you want
the loop to start.
Input Time
0.01.00
3
press at the point you want the loop to
end.
Playback immediately jumps back to the
start point and plays the loop round and
round.
• When playing a DVD-Video/Video mode
• To resume normal playback, select Off
CD Video CD DivX
2
ENTER
During playback, select 'A-B
With 'A (Loop Start)'
ENTER
Play Mode
Search Mode A (Loop Start)
A-B Repeat
B (Loop End)
Repeat
Off
Program
With 'B (Loop End)' highlighted,
ENTER
DVD, or from the HDD, the start and end
points of the loop must be in the same
title.
from the A-B Repeat menu, or press
CLEAR if no menu OSD (such as the Play
Mode menu) is displayed.
08
89
En