Setting The Picture Quality For Disc Playback - Pioneer DVR-940HX-S Operating Instructions Manual

The Video Adjust menu
Setting the picture quality
for disc playback
This setting determines how the picture will
look when playing discs.
Choosing a preset
1 With a disc playing (or paused),
HOME MENU
press to display the Home Menu.
ENTER
2 Select 'Video Adjust'.
ENTER
3 Select a setting.
Detailed Settings
There are six presets available:
• TV – suitable for LCD and cathode-ray
tube TVs
• PDP – suitable for plasma display
screens
• Professional – suitable for professional
monitors
• Memory1 – user preset 1
• Memory2 – user preset 2
• Memory3 – user preset 3
You can press DISPLAY to see the individual
settings for the current preset (TV, PDP or
Professional).
TV
Creating your own set
There are three user presets in which you
can save your own set of picture quality
settings for disc playback.
1 Follow Choosing a preset above and
select one of the user presets (Memory 1,
2 or 3).
2 Move the cursor down and select
'Detailed Settings'.
Memory1
Detailed Settings
3 Select the picture quality setting you
want to adjust.
Memory1
Motion
Prog. Motion
PureCinma
Subtitle Adjust
YNR
CNR
BNR
MNR
You can adjust the following settings:
• Prog. Motion – Adjusts the motion and
still picture quality when video output is
set to progressive. (Prog. Motion is
ineffective when PureCinema is On.)
• PureCinema – This setting optimizes the
picture for film material when the video
output is set to progressive. Usually set
to Auto 1 but try switching to Auto 2,
On or Off if the picture appears
unnatural.
• Subtitle Adjust – When the video
output is set to progressive scan, it's
possible that the subtitles in some
movies will disappear unnaturally. In this
case select the On setting (only possible
when connected using HDMI).
• YNR – Adjusts the amount of noise
reduction (NR) applied to the Y
(brightness) component.
Still
Auto1
On
Off Max
Off Max
Off Max
Min Max
15
135
En