Connecting A Tv Antenna - Pioneer DVR-940HX-S Operating Instructions Manual

02 Connecting up

Connecting a TV antenna

This recorder has separate built-in TV tuners
for terrestrial digital and terrestrial analog TV
broadcasts.
If you are ready to receive digital broadcasts
now, use the longer of the supplied RF
antenna cables to connect the output of your
antenna to the ANTENNA (DIGITAL) IN
connector. Next use the short supplied RF
antenna cable and connect it between the
ANTENNA (DIGITAL) OUT and ANTENNA
IN (RF IN) connectors. Lastly, connect the
recorder to your TV from the ANTENNA OUT
connector.
TV
AV 2 (INPUT 1/DECODER)
AC IN
AV 1 (RGB) – TV
16
En
COMPONENT
OUT
VIDEO OUT
P P Y IN
R B
ANTENNA
CONTROL G-LINK (DIGITAL)
S-VIDEO
IN
OUTPUT
DIGITAL
AUDIO OUT
IN
OUT
ANTENNA
INPUT3
R L
AUDIO VIDEO
COAXIAL
COMMON INTERFACE
Antenna
wall outlet
If your area is not yet served with terrestrial
digital services, connect your antenna's
output to the ANTENNA IN (RF IN)
connector using one of the supplied RF
antenna cables. Next, connect the recorder
to your TV from the ANTENNA OUT
connector.
TV
COMPONENT
VIDEO OUT
P P
R B
AV 2 (INPUT 1/DECODER)
AC IN OUTPUT
AV 1 (RGB) – TV R L
AUDIO
We strongly recommend using an outdoor
antenna for better broadcast picture quality.
If, however, you want to use an indoor
antenna, use one with a signal amplifier
rated at 5 V, 30 mA and set Aerial Power to
On in the Initial Setup menu (see page 139).
OUT
Y IN
ANTENNA
CONTROL G-LINK (DIGITAL)
S-VIDEO
IN
DIGITAL
AUDIO OUT
IN
OUT
ANTENNA
INPUT3
VIDEO
COAXIAL
COMMON INTERFACE
Antenna
wall outlet