Fan Belt - WACKER Group PT 6LT Operator's Manual

Maintenance

5.10 Fan Belt

See Graphic: wc_gr001190
5.10.1 Remove the belt guard (a) and check the fan belt (b) for cracks or
5.10.2 To tighten the fan belt, add or remove spacers (c) located between the
5.10.3 To check fan belt tension, press the fan belt halfway between belt
a
wc_tx000567gb.fm
Check the tension on the fan belt every 125 hours. Replace the fan belt
every 500 hours.
splitting.
fan pulley halves (d). Spacers are 0.5, 1.0, 2.0 mm (0.017, 0.034,
0.068 in.) thick.
pulleys with a 10 kg (22 lb.) load or strong thumb pressure. The fan belt
should deflect 1 cm (3/8 in.).
d
b
34
PT 6 /...
c
wc_gr001190