Periodic Maintenance Schedule - WACKER Group PT 6LT Operator's Manual

PT 6 /...
5.3

Periodic Maintenance Schedule

Lombardini 11LD625-3 Engine
Check engine oil. Fill to correct level.
Clean air cleaner.
Check condition and tension on fan belt.
Change oil in engine crankcase.*
Change engine oil filter.
Change fuel filter
Clean engine cooling fins.
Check valve clearance.
Tighten fittings and clean injectors
Replace fan belt.
* Change more often in dusty conditions. Refer to engine manufacturer's manual.
Machine
Check external hardware.
Open pump housing cover and remove any
debris from inside of pump housing.
Check oil level in seal housing. Fill to cor-
rect level.
Check bearing/seal housing for oil or water
leaks.
Check oil level in bearing housing.
Drain water from water separator in fuel line.
Change oil in seal housing.
Change oil in bearing housing.
Check coupling bolt tightness.
wc_tx000567gb.fm
The chart below lists basic engine maintenance. Refer to the engine
manufacturer's Operation Manual for additional information on engine
maintenance.
Daily Every Every
before 125 250
starting hrs. hrs.
Daily Every
before 100
starting hrs.
29
Maintenance
Every
500
hrs.
Every Every
250 500
hrs. hrs.