The Placement tab allows you to set the position where the stamp is to be printed.
Shows the status of the stamp configured in each tab.
Specifies the stamp position on the page.
Selecting Custom from the list allows you to enter values for the X-Position and Y-Position
Specifies the angle of rotation for the stamp. The angle can be set by entering the number of
Negative values rotate the stamp clockwise.
• Orientation is enabled only when Text or Date/Time/User Name is selected for Stamp Type
on the Stamp tab.
• Click Defaults to set the stamp position to Center and the orientation to 0.
Save settings Tab
The Save settings tab allows you to register a new stamp or delete an unnecessary stamp.
Enter the title to save the stamp you created.
Up to 64 characters can be entered.
• Spaces, tabs, and returns cannot be entered at the beginning or end of a title.
Shows a list of saved stamp titles.
Specify a title to display the corresponding stamp in Title.
Saves the stamp.
Enter a title in Title, and then click this button.
Deletes an unnecessary stamp.
Specify the title of an unnecessary stamp from the Stamps list, and click this button.
The Background tab allows you to select a bitmap file (.bmp) to be used as a background or determine
how to print the selected background.