Table of Contents
Advertisement
4.6
CO Line Programming
Description
Selection
Default
Programming
Conditions
Feature References
ISDN Layer 1 Active Mode
Assigns the active mode of Layer 1 on ISDN port basis.
• Port number: KX-TD816—01 through 06,
KX-TD1232—01 through 12,
• Permanent / Call
• KX-TD816 Port 05 and 06– Call; other ports–permanent
• KX-TD1232 All ports – Permanent
1.
Enter 425.
Display: L1 Active Mode
2.
Press NEXT.
Display: Port NO?–>
3.
Enter a port number.
To enter a first port, you can also press NEXT.
Display example: #01:Permanent
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7.
Repeat steps 4 through 6.
8.
Press END.
• For the KX-TD1232, port numbers 01 through 06 are for the Master
System and 07 through 12 are for the Slave, if available.
• To assign all ports to one selection, press the
case, the display shows the contents programmed for a first port.
• After this assignment, you should reset the system so that this
assignment is effective.
None
425
(
=all ports)
(
=all ports)
key at step 3. In this
21
Advertisement
Table of Contents
