Table of Contents
Advertisement
4.8
Extension Programming
Description
Selection
Default
Programming
Conditions
Feature References
Incoming Call Display
Allows you to select between three display types when an incoming
call is received.
"Calling" means the incoming caller's telephone number is
displayed. "Called" means the called telephone number is
displayed. "Line Name" means the CO line name assigned in the
[417] program is displayed.
• Jack number: KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
• Display Types: Calling/ Called/ CO Line Name
All jacks – Calling
1.
Enter 612
Display: Incoming Display
2.
Press NEXT.
Display: Jack NO?–>
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01:Calling
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7.
Repeat steps 4 through 6.
8.
Press END.
• In the case of the KX-TD1232, jack numbers 01 through 32 are for
the Master System and 33 through 64 are for the Slave, if available.
Section 3, Features,
CO Incoming Call Information Display — Vol. 1
Display, Call Information — Vol. 1
612
(
=all jacks)
(
=all jacks)
27
Advertisement
Table of Contents
