Chapter 2 Installation
Unpacking the Switch
While unpacking the switch, check to make sure the following items are included:
Switch unit
Requested GBIC modules
Accessory kit containing the following:
Power cord, if ordered
Manuals, if ordered
Optional Software Feature Guides, if a feature(s) is ordered
Rubber mounting feet
Save packing materials in case you need to return the switch. Refer to Appendix B,
Switch Support for information on contacting Brocade.
Cooling Requirements
Cooling air is drawn into the chassis by six fans mounted near the rear of the chassis,
venting exhausted air through the front of the switch.
NOTE:
free access to ambient air for cooling.
2-2
Do not block the front or rear air vents. The switch must have