Brocade Communications Systems SilkWorm 2400 Hardware Reference Manual page 40

Appendix
The display halts after each error is displayed, prompting you to either press <Enter> to
continue or type a
displayed.
switch:admin> errShow
Task ID
Error 02
--------
0x103dc470 (tSwitch): Apr
Error SENSOR-FAILED, 3, sensor 7 (Fan 2) is below minimum
Type <CR> to continue, Q<CR> to stop:
Error 01
--------
0x103dc470 (tSwitch): Apr
Error DIAG-TIMEOUT, 1,
Port 2 receive timeout.
Err#0004
Type <CR> to continue, Q<CR> to stop:
Figure E-1
To display error messages via Telnet
1 From the prompt, enter errShow command.
2 To scroll through the error list, type <CR>
3 Scroll through error log (if no errors encountered, the command returns "No Error").
C-2
to quit. Continue pressing <Enter> until the prompt
Q
Date & Time of
Occurences
Task Name
9 10:41:06 (4)
9 10:40:51
errShow Command Example
Number of Occurences
Error Type
Error Level
Description
is
(=>)