Items Included With The Brocade Dcx 8510-4; Unpacking And Installing The Brocade Dcx 8510-4 - Brocade Communications Systems DCX 8510-4 Backbone Quick Start Manual

Items included with the Brocade DCX 8510-4

The Brocade DCX 8510-4 ships with the following:
•
Brocade DCX 8510-4 chassis, populated with:
-
Control processor blades (CP8)
-
Core switch blades (CR16-4)
-
Port blades, application blades, and encryption blades (included based on customer specification)
-
Blade slot filler panels (for slots not filled by blades)
-
Port side exhaust kit (included based on customer specification)
-
WWN cards
-
WWN bezel (logo plate)
-
Power supplies
-
Power supply filler panel (included if there is only one power supply)
-
Blower assemblies
-
Cable management finger assemblies
-
Chassis door
•
Accessory kit containing the following items:
-
Brocade DCX 8510-4 Backbone QuickStart Guide
-
Brocade Documentation CD (contains documents related to the Brocade DCX 8510-4)
-
ESD grounding strap
-
USB device
-
RS-232 serial cable. The RS-232 cable has an adapter at one end that can be removed to provide an
RJ-45-style connector.
•
Brocade DCX 8510-4, DCX-4S rack mount kit with instructions
Order the optical transceivers (SFP+, mSFP, and QSFP) from Brocade. The Brocade DCX 8510-4 supports SWL, LWL,
and ELWL transceivers. The mSFPs and QSFPs are SWL transceivers only.
NOTE
For information about the SFP+, mSFP, and QSFP transceivers that are qualified for the Brocade DCX 8510-4, go to
http://www.brocade.com/products/interop_and_compatibility.jsp.

Unpacking and installing the Brocade DCX 8510-4

Use the following procedure to unpack and install your Brocade DCX 8510-4.
CAUTION
Use safe lifting practices when moving the product. (C015)
10 of 24 Brocade DCX 8510-4 Backbone QuickStart Guide
Publication Number: 53-1002178-01