DSS-5000P NI
Before Using The DSS-5000P NI
•
Completely read this Quick Start Guide and become familiar
with the analyzer components.
•
Fully charge the analyzer before using
IMPORTANT: For additional support go to:
nissan.dss5000.com
Controller
Camera & Flashlight: For VIN scanning and identification.
Temperature Sensor: For measuring battery temperature.
Micro-USB Port: For updating and servicing the Controller
when a WiFi network is not available.
Power Supply Connection
www.midtronics.com
DSS-5000P NI
Battery Analyzer
Carrying Handle: For carry-
ing the Controller and Tester
Pod (when attached).
Controller Release Lever:
Press to release the Control-
ler from the Tester Pod.
Power Button: Hold for 2
seconds to turn the Control-
ler on and off independent
of the Tester Pod. Flashes
when the Controller is being
charged.
Touch Screen: Primary user
interface.
Tester Pod
Controller Charging Contacts: For charging and communi-
cating with the Controller when mounted to the Tester Pod.
Status Indicator LEDs:
- Power is on.
- Tester Pod is communicating with the Controller.
- Clamps reversed
Integrated Printer: For printing and sharing test results.
Clamp Storage Mounts: Use to keep the test clamps pro-
tected when the tester is not in use.
Tester Pod Internal Batteries
Charging Dock
Tester Pod Charging Contacts: For charging the Tester Pod
Power Supply Connection
Midtronics Inc.
7000 Monroe Street Willowbrook, IL 60527
Quick Start Guide
Page
1
June 2017
Quick Start Guide
167-000799EN-A
167-000799EN-A
June 2017