Specifications - Harman Kardon MAS 101 Service Manual

MAS SySteM
System
Power output
Bandwidth
System frequency response
Signal-to-noise ratio, a-weighted
channel separation
crosstalk between sources
Line-level input sensitivity at 1khz
Phono MM input sensitivity at 1khz
Loudspeakers
Low-frequency transducers
high-frequency transducers
nominal impedance
Sensitivity (2.83V/1m)
frequency response
crossover frequency
FM Tuner Section
frequency range
usable sensitivity
frequency response
Signal-to-noise ratio
distortion
Stereo separation
Selectivity
Image rejection
If rejection
tuner output level
number of presets
rdS capability
65 watts per channel, 20hz – 20khz, thd <0.07%, into 6 ohms, both channels driven
20hz – 35khz, –3dB
20hz – 20khz, ±0.5dB
90dB (analog inputs), 96dB (digital inputs)
≥65dB
≥70dB
250mV rMS, ±1dB
7.5mV
two 130mm honeycomb composite drivers, ported
two 25mm MMd® domes, shielded
8 ohms
85dB
60hz – 25khz (–3dB)
2200hz
87 – 108.0Mhz
Ihf 1.3µV/13.2dBf
10hz to 15.3khz
mono/stereo 68/65dB
mono/stereo 0.15/0.3%
35dB @ 1khz, 100% deviation @ 65dBf
±300khz; 65dBf
80dB
90dB
1khz, ±50khz, dev 500mV
30
PS (program service), rt (dynamic radio text)
1

Specifications