Specifications - Harman Kardon MAS 101 Owner's Manual

MAS SYSTEM

Specifications

System
Power output:
Bandwidth:
System frequency response:
Signal-to-noise ratio, A-weighted:
Channel separation:
Crosstalk between sources:
Line-level input sensitivity at 1kHz:
Phono MM input sensitivity at 1kHz:
Loudspeakers
Low-frequency transducers:
High-frequency transducers:
Nominal impedance:
Sensitivity (2.83V/1m):
Frequency response:
Crossover frequency:
FM Tuner Section
Frequency range:
Usable sensitivity:
Frequency response:
Signal-to-noise ratio:
Distortion:
Stereo separation:
Selectivity:
Image rejection:
IF rejection:
Tuner output level:
Number of presets:
RDS capability:
18
65 watts per channel, 20Hz – 20kHz, THD <0.07%, into 6 ohms, both channels driven
20Hz–35kHz, –3dB
20Hz–20kHz, ±0.5dB
90dB (Analog inputs), 96dB (Digital inputs)
≥65dB
≥70dB
250mV RMS, ±1dB
7.5mV
Two 130mm honeycomb composite drivers, ported
®
Two 25mm MMD domes, shielded
8 ohms
85dB
60Hz–25kHz (–3dB)
2200Hz
87–108.0MHz
IHF 1.3μV/13.2dBf
10Hz to 15.3kHz
mono/stereo 68/65dB
mono/stereo 0.15/0.3%
35dB @ 1kHz, 100% deviation @ 65dBf
±300kHz: 65dBF
80dB
90dB
1kHz, ±50kHz, Dev 500mV
30
PS (program service), RT (dynamic radio text)
Specifications