FRONT-PANEL CONTROLS REAR-PANEL CONNECTIONS REMOTE CONTROL FUNCTIONS INSTALLATION OPERATION USING ThE REMOTE CONTROL SETTING ThE CLOCk TURNING ON ThE MS 150 SETTING ThE ALARM SETTING ThE ALARM VOLUME SETTING ThE EQUALIZATION (EQ) VOLUME CONTROL SOURCE SELECTION FM RADIO PROGRAM STATION PRESETS...
Supplied Accessories Introduction The following accessory items are supplied with the MS 150. If any of these items are More than 50 years ago, we sold the very first audio receiver, a high-perfor- missing, please contact harman kardon customer service at www.harmankardon.com.
Skip/Scan Forward/Reverse: These buttons’ functions depend on the current source: On/Standby: Press this button to turn the MS 150 on or to place it in the Standby mode. • iPod/iPhone or CD: Press and release the buttons to skip to the next track or to Press and hold the button for two seconds to disarm the alarm.
Eject: When a CD is loaded, press this button to eject it. • iPod/iPhone or CD: Press and release a button to skip to the next track or to the beginning of the current track. Press the reverse button twice to skip to the previ- Tuning: When FM radio is the selected source, press and release this button to tune to ous track.
5. The MS 150 features four audio inputs for other devices, such as portable players. the power supply and detachable cable, the dock for iPod/iPhone and inserts, and This step is optional and may be skipped if you have no external devices. If you have a player with: the remote control and batteries.
Never throw the batteries into fire, and remove them from the remote if it will be unused ton to put the unit into the Standby mode; you cannot set the alarm while the unit is on. for a long period of time.
Do not attempt to save your selection. to force the disc. If the disc will not load, turn off the MS 150, unplug it and bring it to Volume Control an authorized harman kardon service center for inspection.
To remove the dock adapter, e.g., to switch adapters for a different iPod/iPhone model, insert a flathead screwdriver into the slot at the rear of the adapter and pry it up. Refer to the illustration in the Installation section on page 7.
1khz, ±50khz, Dev 500mV Number of presets RDS capability PTy (program type), PS (program service), Text (radio text) Features, specifications and appearance are subject to change without notice. Please register your product at www.harmankardon.com. you’ll need your product’s serial number.
International Industries, Incorporated, registered in the United States and/or other countries. iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
Need help?
Do you have a question about the MS 150 and is the answer not in the manual?
Questions and answers