Configuration; Configuring The Xbox-Ip - Autoscript XBox-IP Installation Manual

Configuration

Configuring the XBox-IP

To configure the XBox-IP the device will need to be connected to the
host PC with the WinPlus-IP software installed either locally or via the
network.
All configuration of the box and controllers takes place in WinPlus-IP.
1.
Start the WinPlus-IP application.
2.
From the Devices
panel click the plus
symbol.
3.
The Add Discovered
Device window will
open.
4.
Double click the
desired device and
it will be added to the
Devices window.
10
If no devices are detected.
1.
From the Devices panel click the plus symbol. This will open the
Add Discovered Device window.
2.
Click the Add Manual Devices button to open the Manually Add
Device window.
1.
Select the required device type, in this case the XBox-IP. Add the
device name and IP address. (See your systems administrator).
2.
Click APPLY to store the device. The new device will now appear
in the Devices panel.
3.
Repeat the process to add further devices.
4.
Refer to the WinPlus-IP user guide for further configuration advice.