Miele WWF 060 Operating And Installation Instructions page 26

4. Selecting program settings
Canceling delay start
The selected delay start time can be
canceled before the program start.
 Touch the  sensor button.
The selected delay start time will ap-
pear in the display.
 Set a time value of
  sensor buttons. Confirm with
the OK sensor button.
The selected delay start time has been
canceled.
After the program start, the selected
delay start time can only be changed
or canceled by interrupting the pro-
gram.
SmartStart
The SmartStart function lets you de-
fine a time period during which your
washing machine will start automati-
cally. The start takes place via a sig-
nal, e.g., from your energy supplier,
that indicates that the electricity rate is
particularly economical. Please check
with your local utility provider for avail-
ability.
This function is active when the
Grid setting is switched on.
The time period can be defined be-
tween 15 minutes and 24 hours. During
this period, the washing machine waits
for the signal from the energy supplier.
If no signal is sent during the defined
period, the washing machine starts the
wash program.
26
00:00 h with the
Smart-
Setting the timeframe
If you have activated the
function in Settings,
stead of will appear in the dis-
Start in
play when you touch the  sensor
button (see "Settings – SmartGrid").
The procedure for setting this is the
same as for setting the time for delay
start.
 Use the  sensor buttons to enter
the hour and confirm your entry with
the OK sensor button.
The hour will be saved and the minute
numerical keypad will be highlighted.
 Use the  sensor buttons to enter
the minutes and confirm your entry
with the OK sensor button.
 Press the Start/Stop sensor button to
start the wash program with Smart-
Start.
The following will appear in the display:
 
SmartStart
 
SmartGrid
SmartStart in in-
OK