Temperature
with garment care label sym-
bols
Proofing
105°F/40°C
Warm +
Drain/Spin
Separate rinse
Treating microfiber fabric, ski wear, or Table
Linens made from mainly synthetic fibers to
provide a finish which is resistant to water and
dirt.
– The items should be freshly laundered and
spun or dried before proofing.
– For best results, the items should be heat-
treated afterwards, either in a tumble dryer or
by ironing.
– Drain only: Set spin speed to
– Make sure you select the appropriate spin
speed.
For rinsing hand-washed items.
Reduce the final spin speed for items which
crease easily.
Program guide
Item/Tip
Small load (5.5 lb/2.5 kg)
Full load (17.6 lb/8 kg)
No
Full load (17.6 lb/8 kg)
.
39