Remote Control; Smartgrid - Miele TWI 180 WP Operating Instructions Manual

Remote control

The
Remote control
visible if the Miele@home
up and activated.
Once the Miele@mobile app has been
installed on your mobile device, you
can check the status of your tumble
dryer from anywhere and start it
remotely. You can also control it
remotely via the MobileControl
program.
You can switch off the
setting if you do not want to operate the
dryer with your mobile device.
If is not switched on, the
Remote control
app can cause the program to be
canceled.
Use the "delay start" button to set a
time until you start the dryer and start
the delay start (see "Delay start/
SmartStart"). The tumble dryer will then
start within the timeframe specified
when it receives your signal. If it has not
received a start signal from the energy
supplier by the latest start time set, the
tumble dryer will start automatically.
Remote control is switched on by
default.
setting is only
setting is set
Remote control

SmartGrid

The
Remote control
visible if the Miele@home
up and activated.
This function can be used for starting
your tumble dryer automatically at a
time when your energy costs are most
economical.
Activating SmartGrid
start button a new function. You set the
SmartGrid via the "delay start" button.
The tumble dryer will then start within
the timeframe specified when it receives
a signal from the energy supplier. If it
has not received a signal from the
energy supplier by the latest start time
set, the tumble dryer will start
automatically (see "Delay start"). Please
check with your local utility provider for
availability.
The SmartGrid function is switched off
by default.
Settings
setting is only
setting is set
, gives the delay
91