Key Automation VIPER LED VIP7U Installation And Use Instructions Manual page 23

4.2 Connection of the motor body to the guide
Standard
6x15 self tapping
screw
U bracket
4.3 Installation of the guide and motor on the door
Position the guide with reference to figure
Wall
MIN 0 cm
MAX 40 cm
Door
8x25 Hinge pin
N.B. For installations on overhead doors, the
accessory BO-SEZ is required.
4.4 Manual opening of door
In case of power failure
(1). If the door is closed:
Pull the cord and release the clutch to allow the door to be lifted easily.
(2). If the door is open:
Pull the cord once to allow the door to lower to the closed position.
Guide
lateral movement ring
370
200
270
Support bracket
Guide
Expansion plug
6x80 Screw
Door bracket
6x15 self-tapping
screw
Curved arm for door
Carriage
Guide
90° rotated head
6x15 self tapping
screw
U bracket
3080
14
70
16
Fastening
Expansion plug
Support bracket
8x20 Screw
Cord
lateral movement ring
MAX 40 cm
with standard bracket included
Fastening
Expansion
plug
U bracket
8x20 Screw
EN
Guide
23