Related Manuals for Key Automation Revo+
Summary of Contents for Key Automation Revo+
- Page 1 Instructions and warnings for installation and use RÉVO+ Gear motor for hinged gates...
-
Page 2: Images
IMAGES Fig. 1 EN - Space dimensions MAX 740 Fig. 2 EN - Use limitations EN - Maximum weight of the gate door EN - Maximum length of the gate door MAXIMUM DOOR LENGTH (m) Fig. 3 EN - Components 1 - Curved arm 2 - Straight arm 3 - Door fixing bracket... - Page 3 Fig. 4 EN - Quotes representation Fig. 5 EN - Opening angle graph 90/95° 100/105° 95/100° 105/110° 110/115° 115/120° 120° 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 Fig.
- Page 4 Fig. 7 EN - Positioning the motor 8 mm Fig. 8 EN - Fixing the motor Fig. 9 EN - Fixing the leaf bracket...
- Page 5 Fig. 10 EN - Gearmotor release UNLOCK LOCK Fig. 11 EN - Fixing the leaf bracket Fig. 12 EN - Mechanical stop adjustment...
- Page 6 Fig. 13 EN - Limit switch cap assembly Fig. 14 EN - Electrical connections 1 cm Fig. 15 EN - Positioning the cover...
- Page 7 Fig. 16 EN - Connections and cables Fig. 17 EN - Connections and cables Fig. 18 EN - Removing the light cover...
- Page 8 Fig. 19 EN - Replacement of the leds Fig. 20 EN - Second motor connections...
-
Page 9: Table Of Contents
TABLE OF CONTENTS Images p. 2 Safety warnings p. 16 Product overview p. 18 Product description p. 18 Models and characteristics p. 18 Preliminary checks p. 18 Installing the product p. 19 Installation p. 19 Adjusting the mechanical limit switch in opening p. -
Page 10: Safety Warnings
If in any doubt regarding installation, do not proceed and con- ses by a person with similar qualifications, to prevent tact the Key Automation Technical Service for clarifications. all risks; Under European legislation, an automatic door or... - Page 11 Key Automation reserves the right to amend these instructions if necessary; they and/ children must be supervised to ensure that they do not or any more recent versions are available at play with the equipment;...
-
Page 12: Product Overview
2 - PRODUCT OVERVIEW 2.1 - Description of the product The RÉVO+ gear motors are destined to be installed in systems technical specifications table. for the automation of gates with hinged doors. The use of gear motors for applications which differ from those The RÉVO+ gear motors have been designed and constructed to indicated above is prohibited. -
Page 13: Installing The Product
4 - PRODUCT INSTALLATION 4.1 - Installation Before starting the installation, make sure that the product is in- and washers (not supplied). Fasten the gearmotor to the column tact and that the packaging contains all the components shown bracket with the supplied screws, washers and nuts (Fig. 8a). in Fig.3. -
Page 14: Replacing Led
4.5 - Replacing led Switch-off the power supply. Open the cover as shown on Disconnect the plug connector (Fig.19a). paragraph 4.3. Connect the new led stripe and insert them into the mask. By using a screwdriver, release the bottom screw of the cover Insert the mask by placing first the seal side and then fastening it (Fig. - Page 15 6 - DECLARATION OF CONFORMITY DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY The undersigned Nicola Michelin, General Manager of the company Key Automation srl, Via Meucci 23 - 30027 San Dona’ di Piave (VE) – ITALIA declares that the product type: REVO+ 24Vdc articulated arm gearmotor drive for swing gates up to 2.3m...
- Page 16 Key Automation S.r.l. Via Meucci 23 - 30027 San Donà di Piave (VE) T. +39 0421 307456 - F. +39 0421 65698 Instruction version info@keyautomation.it - www.keyautomation.it 580REP REV.01...
Need help?
Do you have a question about the Revo+ and is the answer not in the manual?
Questions and answers