Setting The Power Amp Direct Mode - Marantz PM8006 Owner's Manual

Contents Connections

Setting the power amp direct mode

When a pre-amplifier is connected to this unit and the unit is used as a
power amplifier, follow the instructions below to turn power amp direct
mode on.
POWER AMP DIRECT
Turning power amp direct mode on
1
Press and hold POWER AMP DIRECT for more than 3
seconds to turn the power amp direct mode on.
The power amp direct indicator lights and the power amp direct
mode turns on. The input source switching function of the unit is
disabled, and the device connected to the power amp direct input
terminal is played back.
Front panel Rear panel
Playback Settings
Turning power amp direct mode off
1
NOTE
0 When the power amp direct mode is on, adjustment of the volume, balance and
tone has no effect. Adjust the volume on the pre-amplifier.
0 The input source cannot be switched when power amp direct mode is on.
0 When the power amp direct mode is on, the main unit outputs at maximum
volume. Check the output level on the input device before playing it and adjust the
volume accordingly.
Remote control 32
unit
Tips
Press and hold POWER AMP DIRECT for more than 3
seconds to turn the power amp direct mode off.
The power amp direct indicator turns off and the power amp direct
mode turns off.
Index
Appendix