Table of Contents
Advertisement
5. POWER BUTTON— Use this to turn the scanner ON or OFF.
POWER LED— Indicates the scanner status.
Light
Blue
The scanner is turned on, ready to scan images.
Red
The scanner is in standby mode if it is idle for 10 minutes.
The scanner is off, either because the power is not turned on, or
Off
because the power cord is not properly plugged into an AC power
outlet.
6. SCANNER BUTTONS—You may press any button to perform a predefined
scanning task.
7. POWER RECEPTOR— Connects the scanner to a standard AC power outlet by
the AC adapter included.
8. USB PORT— Connects the scanner to a USB port on your computer by the USB
cable included.
4
9. USB HUB
— Connects the scanner to a USB port on another USB scanner by the
USB cable.
4
This function may or may not be available depending on the scanner model you purchase.
Status
5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the OpticSlim and is the answer not in the manual?
Questions and answers
Hi! I’ve had my machine for a few years now but now it’s not turning on. Not sure if this is a cord issue, but I’ve tried different electrical outlets without luck. Any advice?
The issue could be due to an obsolete or faulty power cable, as mentioned in the context. The power cable is described as "klutzy" and possibly an obsolete design, which may prevent proper connection. Additionally, ensure that the power cable is securely connected and not damaged. If the issue persists, consider replacing the power cable or contacting the seller or manufacturer for support.
This answer is automatically generated