Plustek OpticSlim User Manual page 18

Right-click the icon
Configuration in the pop-up menu that opens.
Within the "Button Configuration" window, you can find a row of icons running
through the left side of the window. Each icon corresponds to a button on your
scanner's panel (as well as MacAction's on-screen Execute menu). Clicking any icon
on the left pane and its current button settings are displayed immediately on the right
pane. You may adjust the settings as desired.
Click the Help button within the Button Configuration window for more information
about the settings.
Scan from the Buttons
Scanning documents or images from this scanner is very easy. Follow the two
steps described below:
1. Place the document or images onto the scanner. (Refer to "Chapter II.
Scanning" of this guide for more information in placing paper on the flatbed
glass properly.)
Attention
2. Do one of the following to start scanning:
Press the button from the scanner's panel.
Right-click the icon
up menu that opens. Click the desired button function item in the pop-up
menu.
The scanner starts to scan immediately and carry out the corresponding action
according to the settings you have set up in the Button Configuration window.
in the Dock, and then choose Button
Place only text documents for OCR purposes. Do
not scan a photo using the OCR button.
in the Dock, and then choose Execute in the pop-
15