Table of Contents
Advertisement
1. Plug the AC adapter into the scanner's power receptor.
2. Plug the other end of the power cable into a standard AC power outlet.
3. Plug the square end of the included USB cable to the USB port at the rear of the
scanner.
4. Plug the rectangular end of the USB cable to an available USB port on your
computer.
5. If you plan to connect your scanner to a USB hub
connected to the USB port in your computer. Next, connect the scanner to the USB
hub.
If your scanner has the USB hub function
connection steps:
Attention
1. Plug the AC adapter into the scanner's power receptor.
2. Plug the other end of the power cable into a standard AC power outlet.
3. Plug the square end of the included USB cable to the USB port at the rear of the
scanner.
4. Plug the rectangular end of the USB cable to an available USB port on your
computer.
6
The USB hub is not included with the scanner.
7
This function may or may not be available depending on the scanner model you purchase.
Please make sure the scanner is turned OFF
before you plug or unplug the scanner power
adapter.
8
6
, make sure that the hub is
7
please follow the below
,
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the OpticSlim and is the answer not in the manual?
Questions and answers
Hi! I’ve had my machine for a few years now but now it’s not turning on. Not sure if this is a cord issue, but I’ve tried different electrical outlets without luck. Any advice?
The issue could be due to an obsolete or faulty power cable, as mentioned in the context. The power cable is described as "klutzy" and possibly an obsolete design, which may prevent proper connection. Additionally, ensure that the power cable is securely connected and not damaged. If the issue persists, consider replacing the power cable or contacting the seller or manufacturer for support.
This answer is automatically generated