Tutorial Mode; Set And Forget Memory; Low Voltage Warning; Loss Of Antenna Connection - Beltronics VECTOR LR Operating Instructions Manual

Radar/laser/safety remote detector. advanced protection system with shadow technology
Hide thumbs Also See for VECTOR LR:
Table of Contents

Advertisement

4. Ka Narrow Bands –With Super Wideband Ka turned
, any Ka narrow frequency which is engaged is
OFF
confirmed by rapid flashing of appropriate signal
strength
Pressing
sequence will suspend the normal power up test
sequence; your unit will be ready for operation.

Tutorial Mode

The tutorial mode allows you to become more
familiar with all audible and visual alerts. To engage
this mode, press the
simultaneously while the unit is
alerts will be presented slowly in order of Laser, K, X,
Ka and
SWS
audio/visual alerts continuously. Press the
to exit. Two "beeps" confirm exiting from the tutorial
mode. Your unit is now

Set and Forget Memory

Any time
feature settings you have selected are retained in the
unit's memory. Set and Forget Memory eliminates the
need to reset your preferred feature settings each
time your unit is turned

Low Voltage Warning

VECTOR LR
ensure proper performance. The unit's operating
range is 10.0 to 16.0 volts. If voltage falls below 10.0,
the highway (
coupled with a series of steady audible "beeps".

Loss of Antenna Connection

In the event the control panel and Radar antenna are
not properly connected, the X/K/Ka band indicators
will flash, coupled with steady audible "beeps".
6
(see page 10).
LED
anytime during the power up test
PWR
AUD
. The tutorial mode will cycle these
Remote is turned
VECTOR LR
Remote continually checks voltage to
) or city (
H
and the
CTY
. The audio/visual
ON
and ready for operation.
ON
and then back
OFF
) indicator will flash,
C
buttons
button
P/V
all
OFF
.
ON

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VECTOR LR and is the answer not in the manual?

This manual is also suitable for:

975

Table of Contents

Save PDF