Beltronics VECTOR LR Operating Instructions Manual page 10

With Auto-Mute off, unit will provide a continuous
series of X, K, Super Wideband Ka or Laser audio
alerts. This standard setting is often preferred when
background noise in a vehicle is loud. Factory setting
is Auto-Mute off. Auto-Mute
FULL illumination of all 4 red
strength meter. Auto-Mute off is confirmed when the
same 4 red
Safety Warning System
When activated, unit will detect signals from
transmitters and provide audio/visual warnings if
™ transmitters are in use. Factory setting is
SWS
X Band On/Off – X BAND LED
When activated, unit will detect X Band signals
(10.456
K Band On/Off – K BAND LED
When activated, unit will detect K Band signals
(24.050
Super Wideband Ka On/Off – KA BAND LED
When activated, unit will detect Super Wideband Ka
signals (33.4
Ka Narrow Band (33.8
When activated, unit will detect ONLY the 33.8
segment of the Ka bandwidth.
Ka Narrow Band (34.36
When activated, unit will detect ONLY the 34.36
segment of the Ka bandwidth.
10
s flash.
LED
(SWS
®
- 10.60
GHz GHz
- 24.205
GHz
- 36.0
GHz
GHz
GHz
is confirmed by the
ON
s in the signal
LED
) – LED#1
™
).
).
GHz
).
GHz
) On/Off (LED#1)
) On/Off (LED#2)
™
SWS
.
ON
GHz
GHz