Table of Contents
Advertisement
RDL-2000
User Manual
3.12 Ping
Use this test to check connectivity to a remote IP device.
Note: This feature is provided as a general diagnostic and troubleshooting tool only and
is not a valid test for benchmarking performance of the wireless interface.
Figure 25: Link Mgr - Tests Screen - Ping Test
Configuration
Ping Size: Enter the size (bytes) of the ping message.
Ping Delay: Enter the period (milliseconds) between sending ping messages.
IP Address: Enter the IP address of the target device.
MAC Address: Enter the MAC address of the target device.
Start: Click this button to start the ping test.
Stop: Click this button to stop the ping test.
Results
Send: Number of ping messages transmitted during the test.
Received: Number of ping responses received during the test.
Latency: Average round trip response time during the test.
70-00143-01-01a
Proprietary Redline Communications © 2010
Page 37 of 50 September 24, 2010
Advertisement
Table of Contents
Need help?
Do you have a question about the RDL-2000 and is the answer not in the manual?