Unit Status Bar; Figure 11: Link Mgr - Status Toolbar - Redline RDL-2000 User Manual

Advanced broadband wireless infrastructure solutions
Table of Contents

Advertisement

a:
Current IIS value.
Peer: RSSI and PHY CRC errors (C) of the Master (5 sec sample).
DL: Disable logging of RDL-2000 event messages.
X:
Delete all on-screen log items for this session. This action does not affect the log
file (if active).
: Save log events to file. Clicking this button toggles between enabled and disabled
state. All new event messages are saved to a file.
Important: The previous log file is overwritten. Use View Log
save the current log file using a different filename.
: View the current log. The
view the log file.
Important: The existing log file is overwritten when the
function is enabled. If required, save the viewed log file using a different filename.
RT: Send a reboot command to the connected RDL-2000.
RU: Clear the log window. This operation does not affect the log file.
?:
Display version information.

3.2.8 Unit Status Bar

Display or hide the unit status bar.
Op Mode: Indicates the current status of the wireless data link.
Master:
Not Available: The Link Manager is not communicating with the RDL-2000.
Online: The wireless link has not been established with the Slave unit.
Online link-up: The wireless link has been established.
Spectrum Sweep: The sweep function is active (wireless link is offline).
Slave:
Not Available: The Link Manager is not communicating with the RDL-2000.
Online: The wireless link has not been established with the Master unit.
Online link-up: The wireless link has been established.
Scanning: The Slave is scanning frequencies in the RF channel list to locate a
Spectrum Sweep: The sweep function is active (wireless link is offline)
Channel: Indicates the RF channel in-use.
RSSI: Received signal strength for this link.
PER: Wireless packet errors for this link (after ARQ).
Note: When the connection to an RDL-2000 is closed, the Link Manager continues to
display the last received RSSI and PER values.
70-00143-01-01a
RDL-2000
(save log events to file) selection must be disabled to

Figure 11: Link Mgr - Status Toolbar

Master with the matching MU ID.
Proprietary Redline Communications © 2010
User Manual
to (view and )
(save all event to file)
Page 20 of 50 September 24, 2010

Advertisement

Table of Contents
loading

Table of Contents