Table of Contents
Advertisement
Reset Unit: Reboot the connected RDL-2000 (CTRL-R).
Clear Log: Clear the Link Manager log window (CTRL-L). This operation does not affect
messages logged to a file.
Clear Reset Text: Clear the recorded cause of the last reset on the connected RDL-
2000. Refer to Table 6: Maintenance - Causes of System on page 40.
3.2.4 Tools Menu
Select Adapter: Choose a network interface card (NIC) on the computer running the
Link Manager application. The selected interface is used to scan the local network for
connected RDL-2000 units. The operator may also specify a network gateway (see the
View menu item Login Bar.
Figure 8: Link Mgr - Select Ethernet Adapter and Default Gateway
Adapter List
Adapter: Unique number for this adapter.
IP Address: IP address of detected unit.
Network Mask: Network IP address mask.
Name: Logical name of detected adapter.
3.2.5 Help Menu
About Link Manager: Display the Link Manager software version.
3.2.6 Login Bar
Use this toolbar to login to a specific unit or when a gateway must be specified.
Unit IP: Enter the IP address of the RDL-2000.
User: Select the user account type.
Admin: Authority to change configuration.
User: Allowed only to view configuration and monitor the link status.
Password: Enter password for the selected user type.
70-00143-01-01a
RDL-2000
Figure 9: Link Mgr - Login Toolbar
Proprietary Redline Communications © 2010
User Manual
Page 18 of 50 September 24, 2010
Advertisement
Table of Contents
