Replacing The Light Bulb; Cleaning The Feed Dog - Janome Stirling 8002D Instruction Manual

w
z x c v
A
b n
AFTER SALES SUPPORT
AUS 1300 526 663
AUS Hotline Costs
q
e
t
r
B
C

Replacing the Light Bulb

1. Turn off the power switch and unplug the
machine.
2. Loosen the face plate set screw, and remove
the face plate.
q Face plate
w Set screw
To remove:
Push and twist to the left.
To attach:
Push and twist to the right. Reattach the face plate,
and retighten the face plate set screw.
e Light bulb
r To remove
t To attach
Note:
* The machine is designed to use a 15 Watts
maximum light bulb.
* The light bulb will be HOT. Protect your fingers
when you handle it.

Cleaning the Feed Dog

z Turn off the power switch and unplug the
machine.
x Open the looper cover and side cover.
c Remove the needles and presser foot.
v Remove the needle plate set screw, and remove
the needle plate.
A Needle plate
B Needle plate set screw
b Brush out the lint around the feed dogs to the
front by using the lint brush or use a vacuum
cleaner.
n Reattach the needle plate, presser foot and
needles.
Close the looper cover and side cover.
C Feed dog
enquiries@esqaustralasia.com.au
MODEL: 8002D PRODUCT CODE: 52832 04/2016
41