Janome Stirling 8002D Instruction Manual page 23

v b
t
n m
u
, .
q
AFTER SALES SUPPORT
AUS 1300 526 663
AUS Hotline Costs
r
y
o
i
w
v Insert the thread between tension discs from
the right. Then pull both sides of thread.
b Pass the thread through upper looper thread
guide.
r Upper looper thread tension dial
t Upper looper thread guide
n Pass the thread through upper looper thread
guide.
m Pass the thread through the looper thread take-
up lever (upper).
y Upper looper thread guide
u Looper thread take-up lever (upper)
, Pass the thread through upper looper thread
guide.
. Holding the end of the thread with a pair of
tweezers, pass it through the hole on the upper
looper. Pull 10 cm (4˝) or more of thread through
the hole.
i Upper looper thread guide
o Upper looper
NOTE:
* When you thread the upper looper only, to avoid
tangled threads pull out both threads over the
needle plate and under the presser foot.
Turn the handwheel toward you until the upper
looper comes to the middle point of its travel, and
unhook the thread of the lower looper from the
upper looper.
Thread the upper looper.
q Lower looper thread
w Upper looper
enquiries@esqaustralasia.com.au
MODEL: 8002D PRODUCT CODE: 52832 04/2016
23