Differential Feed - Janome Stirling 8002D Instruction Manual

Features
q Equipped Foot Pressure Adjusting Screw
Adjust this screw depending on thickness of the material.
• See "Adjustment of Foot Pressure", page 13 for details.
w 3/4 Thread Adaptability
3/4
4 Thread
• See "Threading the Machine", pages between 18 and 31 for details.
THREAD
ADAPTABILITY
3 Thread
• See "Threading the Machine (3 threads)", pages 32 and 33 for details.
e Equipped Thread Cutter
Built in thread cutter for ease of use.
• See "Finishing Sewing", page 28 for details.
r Snap-on Presser Foot
Easy to attach and detach presser foot from the foot holder.
• See "Removing the Presser Foot" and "Attaching the Presser Foot", page 13 for details.
t Easy Rolled Hem Change-Over
No need to change the needle plate for rolled hemming.
Just slide the needle plate setting knob to "R" position to convert the plate for rolled hemming.
• See "Adjustment of Needle Plate Setting Knob (Changing to Standard Overlock or Rolled
Hemming)", page 17 for details.
y Adjustable Cutting Width
HANDY
Easily adjust the cutting width 3.1 - 7.3mm to correct the seam tension depending on the type or
ADJUSTABLE
thickness of the material you sew.
CUTTING
WIDTH
• See "Adjustment of Cutting Width", page 16 for details.
q
e
r
t
y
AFTER SALES SUPPORT
1300 526 663
AUS
8
AUS Hotline Costs
w
EQUIPPED
DIFFERENTIAL
FEED DEVICE
Both stitch length and differential feed dials
can be set at any time, even while sewing.
Differential feed ratio : 0.5 - 2.25
• See "Adjustment of Stitch Length" and
"Adjustment of Differential Feed Ratio", page
14, for detail.
u
1300
STITCHES PER
MINUTE
i
u Differential Feed
The differential feed device is
designed to prevent fabrics
from puckering or stretching.
i 1300 Stitches Per Minute
1300 spm maximum
operating speed.
enquiries@esqaustralasia.com.au
MODEL: 8002D PRODUCT CODE: 52832 04/2016