Accessories; Control Accessories; Inserting Accessories - Siemens HB.78.B series Instruction Manual

_Accessories

Y our appliance is accompanied by a range of
A c c e s s o r i e s
accessories. Here, you can find an overview of the
accessories included and information on how to use
them correctly.

Control accessories

The accessories supplied may differ depending on the
appliance model.
--------
Only use original accessories. They are specially
adapted for your appliance.
You can buy accessories from the after-sales service,
from specialist retailers or online.
The accessories may deform when they become
Note:
hot. This does not affect their function. Once they have
cooled down again, they regain their original shape.

Inserting accessories

The cooking compartment has five shelf positions. The
shelf positions are counted from the bottom up.
In some appliances, the highest shelf position is
marked on the cooking compartment with the grill
symbol.
5
4
3
2
1
Wire rack
For ovenware, cake tins and ovenproof
dishes.
For roasts, grilled items and frozen
meals.
Universal pan
For moist cakes, pastries, frozen meals
and large roasts.
It can be used to catch dripping fat when
you are grilling directly on the wire rack.
Baking tray
For tray bakes and small baked prod-
ucts.
Always insert the accessory between the two guide bars
for a shelf position.
Accessories can be pulled out approximately halfway
without tipping.
Notes
Make sure that you always insert the accessories
■
into the cooking compartment the right way round.
Always insert accessories fully into the cooking
■
compartment so that they do not touch the appliance
door.
Take any accessories that you will not be using out
■
of the cooking compartment.
Locking function
The accessories can be pulled out approximately
halfway until they lock in place. The locking function
prevents the accessories from tilting when they are
pulled out. The accessories must be inserted into the
cooking compartment correctly for the tilt protection to
work properly.
When inserting the wire rack, ensure that lug ‚ is at the
rear and is facing downwards. The open side must be
facing the appliance door and the outer rail must be
facing downwards ¾.
When inserting baking trays, ensure that lug ‚ is at the
rear and is facing downwards. The sloping edge of the
accessory ƒ must be facing towards the appliance
door.
Example in the picture: Universal pan
Accessories
en
11