Toyota LAND CRUISER 78 series Owner's Manual page 79

1 2 3 4 5
6 (Preset buttons)
These buttons are used to preset and
tune in radio stations.
To preset a station to a button: Tune in
the desired station (see "TUNE" button).
Push and hold down the button until you
hear a beep-this will set the station to
the button. The button number will appear
on the display.
To tune in to a preset station: Push the
button for the station you want. The but-
ton number and station frequency will ap-
pear on the display.
These systems can store one AM and one
FM stations for each button (The display
will show "AM" or "FM" when you push
"AM" or "FM"). The preset station memory
will be canceled out if the power source
is interrupted (battery disconnected or
fuse blown).
72
~
(Eject button)
Push this button to eject a cassette.
After you turn the ignition to "LOCK", you
will be able to eject a cassette but you
wi.1I not be able to reinsert it.
......
/~~
(Reverse/Fast forward buttons)
Cassette Player
Push the fast forward button to fast for-
ward a cassette tape. "FF" will appear on
the display. Push the reverse button to
rewind a tape. "REW" will appear on the
display.
To stop the tape while it is fast forward-
ing, push the fast forward button or
"TAPE"; to stop the tape while it is re-
winding, push the reverse button or
"TAPE".
If a tape side rewinds completely, the cas-
sette player will stop and then play that
same side. If a tape fast forwards com-
pletely, the cassette player will play the
other side of the tape, using the auto-re-
verse feature.
Compact Disc Player
If you want to fast forward or reverse
through a compact disc track, push and
hold in the fast forward or reverse button.
When you release the button, the compact
disc player will resume playing.
AM
Push "AM" to turn on the radio and select
the AM band. "AM" will appear on the
display.
If the audio system is off, you can turn
on the radio by pushing "AM". Also, push
"AM" to switch from cassette or compact
disc operation to radio operation.
1 2 3 4 5
6 (Preset buttons)
These buttons are used to preset and
tune in radio stations.
To preset a station to a button: Tune in
the desired station (see "TUNE" button).
Push and hold down the button until you
hear a beep-this will set the station to
the button. The button number will appear
on the display.
To tune in to a preset station: Push the
button for the station you want. The but-
ton number and station frequency will ap-
pear on the display.
These systems can store one AM and one
FM stations for each button (The display
will show "AM" or "FM" when you push
"AM" or "FM"). The preset station memory
will be canceled out if the power source
is interrupted (battery disconnected or
fuse blown).
72
~
(Eject button)
Push this button to eject a cassette.
After you turn the ignition to "LOCK", you
will be able to eject a cassette but you
wi.1I not be able to reinsert it.
......
/~~
(Reverse/Fast forward buttons)
Cassette Player
Push the fast forward button to fast for-
ward a cassette tape. "FF" will appear on
the display. Push the reverse button to
rewind a tape. "REW" will appear on the
display.
To stop the tape while it is fast forward-
ing, push the fast forward button or
"TAPE"; to stop the tape while it is re-
winding, push the reverse button or
"TAPE".
If a tape side rewinds completely, the cas-
sette player will stop and then play that
same side. If a tape fast forwards com-
pletely, the cassette player will play the
other side of the tape, using the auto-re-
verse feature.
Compact Disc Player
If you want to fast forward or reverse
through a compact disc track, push and
hold in the fast forward or reverse button.
When you release the button, the compact
disc player will resume playing.
AM
Push "AM" to turn on the radio and select
the AM band. "AM" will appear on the
display.
If the audio system is off, you can turn
on the radio by pushing "AM". Also, push
"AM" to switch from cassette or compact
disc operation to radio operation.