Toyota LAND CRUISER 78 series Owner's Manual page 67

16012
To lock the rear differential, push and
turn the switch clockwise until it clicks.
If this does not help, turn the switch
fully clockwise to lock the front differ-
ential in addition.
Be sure to stop the wheels before locking
the differentials.
For easy locking, depress the clutch ped-
al, turn the lock switch and slowly release
the clutch pedal.
60
:!:I
16013
The indicator light will blink when the
switch is turned on. Wait a few seconds
for the system to complete operation. Af-
ter the differential is locked, the light will
stop blinking and remain on.
&
CAUTION
• Do not lock the differentials until
the wheels have stopped spinning.
Otherwise, the vehicle may move in
an unexpected direction when the
differential locks are engaged, re-
SUlting in an accident. This may
also lead to possible damage to dif-
ferential lock component parts.
• Do not drive over 8 km/h (5 mph)
when the differentials are locked.
To unlock the differentials, turn the
switch fully counterclockwise.
Unlock the differentials as soon as the
vehicle moves out.
For easy unlocking, slightly turn the steer-
ing wheel in either direction while the ve-
hicle is in motion.
When each of the differential locks is dis-
engaged, the indicator light will go out.
The differentials will also unlock if you
shift the four-wheel drive control lever to
"H2" (lever type) or "H" (lever/button
type). Never forget to turn off the switch
after using this feature.
To check the indicator bulb, turn the igni-
tion key to the "ON" position, but do not
start the engine.
&
CAUTION
Do not keep driving with the differen-
tial lock switch on.
16012
To lock the rear differential, push and
turn the switch clockwise until it clicks.
If this does not help, turn the switch
fully clockwise to lock the front differ-
ential in addition.
Be sure to stop the wheels before locking
the differentials.
For easy locking, depress the clutch ped-
al, turn the lock switch and slowly release
the clutch pedal.
60
:!:I
16013
The indicator light will blink when the
switch is turned on. Wait a few seconds
for the system to complete operation. Af-
ter the differential is locked, the light will
stop blinking and remain on.
&
CAUTION
• Do not lock the differentials until
the wheels have stopped spinning.
Otherwise, the vehicle may move in
an unexpected direction when the
differential locks are engaged, re-
SUlting in an accident. This may
also lead to possible damage to dif-
ferential lock component parts.
• Do not drive over 8 km/h (5 mph)
when the differentials are locked.
To unlock the differentials, turn the
switch fully counterclockwise.
Unlock the differentials as soon as the
vehicle moves out.
For easy unlocking, slightly turn the steer-
ing wheel in either direction while the ve-
hicle is in motion.
When each of the differential locks is dis-
engaged, the indicator light will go out.
The differentials will also unlock if you
shift the four-wheel drive control lever to
"H2" (lever type) or "H" (lever/button
type). Never forget to turn off the switch
after using this feature.
To check the indicator bulb, turn the igni-
tion key to the "ON" position, but do not
start the engine.
&
CAUTION
Do not keep driving with the differen-
tial lock switch on.