Toyota LAND CRUISER 78 series Owner's Manual page 178

The inside of the lens of exterior lights
such as headlights may temporarily fog up
when the lens becomes wet in the rain or
in a car wash. This is not a problem
because the fogging is caused by the
temperature difference between the outside
and inside of the lens, just like the
windshield fogged up in the rain. However,
if there is a large drop of water on the
inside of the lens, or if there is water
pooled inside the
light, contact your
Toyota dealer.
Light Bulbs and Units W Type
Headlights
70/55
A
60/50 B
Front turn signal lights
21
C
Parking lights 5 C
Side turn signal lights
5 D
Rear turn signal lights
21 C
Stop/tail lights
21/5 C
Back-up lights
21 C
License plate lights
Except pick-up
5 C
Pick-up 10
C
Interior light
10
E
Luggage compartment
10 E
light
A: Halogen type
B: Except halogen type
C: Single end bulbs
D: Wedge base bulbs
E: Double end bulbs
-Headlights
A
~l
. . - -"",
73008
1. Open the hood. Remove the radiator
grille retaining screws, release the
clips and take out the radiator grille.
The clips can be released with a flat-
blade screwdriver as shown.
171
The inside of the lens of exterior lights
such as headlights may temporarily fog up
when the lens becomes wet in the rain or
in a car wash. This is not a problem
because the fogging is caused by the
temperature difference between the outside
and inside of the lens, just like the
windshield fogged up in the rain. However,
if there is a large drop of water on the
inside of the lens, or if there is water
pooled inside the
light, contact your
Toyota dealer.
Light Bulbs and Units W Type
Headlights
70/55
A
60/50 B
Front turn signal lights
21
C
Parking lights 5 C
Side turn signal lights
5 D
Rear turn signal lights
21 C
Stop/tail lights
21/5 C
Back-up lights
21 C
License plate lights
Except pick-up
5 C
Pick-up 10
C
Interior light
10
E
Luggage compartment
10 E
light
A: Halogen type
B: Except halogen type
C: Single end bulbs
D: Wedge base bulbs
E: Double end bulbs
-Headlights
A
~l
. . - -"",
73008
1. Open the hood. Remove the radiator
grille retaining screws, release the
clips and take out the radiator grille.
The clips can be released with a flat-
blade screwdriver as shown.
171