Toyota LAND CRUISER 78 series Owner's Manual page 164

OlL004
Temperature range anticipated before
next oil change
27 38
80 100
"C -29 -18 -7 4 16
'F-20 0 20 40 60
If you use SAE 10W-30 or a higher
viscosity engine oil in extremely low
temperatures, the engine may become
difficult to start, so SAl: 5W-30 engine
oil is recommended.
Diesel engine-
Use API CF-4 or CF.
(You may also use API CE or CD.)
Recommended viscosity (SAE):
Oil identification marks
Either or both API registered marks are
added to some oil containers to help
you select the oil you should use.
The API Service Symbol is located any-
where on the outside of the container.
The top portion of the label shows the oil
quality by API (American Petroleum Insti-
tute) designations such as SL. The center
portion of the label shows the SAE viscos-
ity grade such as SAE 10W-30. "Energy-
Conserving" shown in the lower portion,
indicates that the oil has fuel-saving ca-
pabilities.
The ILSAC (International Lubricant Stan-
dardization and Approval Committee) Certi-
fication Mark is displayed on the front of
the container.
EC-08
API-02
API service symbol
ILSAC certification mark
157
OlL004
Temperature range anticipated before
next oil change
27 38
80 100
"C -29 -18 -7 4 16
'F-20 0 20 40 60
If you use SAE 10W-30 or a higher
viscosity engine oil in extremely low
temperatures, the engine may become
difficult to start, so SAl: 5W-30 engine
oil is recommended.
Diesel engine-
Use API CF-4 or CF.
(You may also use API CE or CD.)
Recommended viscosity (SAE):
Oil identification marks
Either or both API registered marks are
added to some oil containers to help
you select the oil you should use.
The API Service Symbol is located any-
where on the outside of the container.
The top portion of the label shows the oil
quality by API (American Petroleum Insti-
tute) designations such as SL. The center
portion of the label shows the SAE viscos-
ity grade such as SAE 10W-30. "Energy-
Conserving" shown in the lower portion,
indicates that the oil has fuel-saving ca-
pabilities.
The ILSAC (International Lubricant Stan-
dardization and Approval Committee) Certi-
fication Mark is displayed on the front of
the container.
EC-08
API-02
API service symbol
ILSAC certification mark
157