Toyota LAND CRUISER 78 series Owner's Manual page 62

Four-wheel drive system-
(a):-Four-wheel drive control
(lever type)
I
H2
H4
LI FT
t4
16009
1FZ-FE and 1HD-FTE engines
H2
L..
H4 N L4
16008
1HZ engine
Use the four-wheel drive control lever
to select the following transfer modes.
"H2" (high speed position, two-wheel
drive): Lever at "H2"
Use this for normal driving on dry hard-
surfaced roads. This position gives greater
economy, quietest ride and least wear.
"H4" (high speed position, four-wheel
drive): Lever at "H4"
Use this for normal driving on wet, icy or
snow-covered roads. This position pro-
vides greater traction than two-wheel
drive.
"N" (neutral position): Lever at "N"
No power is delivered to the wheels. The
vehicle must be stopped.
"L4" (Iow speed position, four-wheel
drive): Lever at "L4"
Use this for maximum power and traction.
Use "L4" for climbing or descending steep
hills, off-road driving, and hard pulling in
sand, mud or deep snow.
The four-wheel drive indicator light comes
on when the "H4", "N" or "L4" mode is
selected.
See "(c) Shifting procedure" for further
instructions.
(a) Four-wheel drive control
(lever/button type)
Use the four-wheel drive control lever
and "H4" button to select the following
transfer modes.
"H" (high speed position, two-wheel
drive): Lever at "H", "H4" button left out.
Use this for normal driving on dry hard-
surfaced roads. This position gives greater
economy, quietest ride and least wear.
"H4" (high speed position, four-wheel
drive): Lever at "H", "H4" button pushed
in.
Use this for normal driving on wet, icy or
snow-covered roads. This position pro-
vides greater traction than two-wheel
drive.
55
Four-wheel drive system-
(a):-Four-wheel drive control
(lever type)
I
H2
H4
LI FT
t4
16009
1FZ-FE and 1HD-FTE engines
H2
L..
H4 N L4
16008
1HZ engine
Use the four-wheel drive control lever
to select the following transfer modes.
"H2" (high speed position, two-wheel
drive): Lever at "H2"
Use this for normal driving on dry hard-
surfaced roads. This position gives greater
economy, quietest ride and least wear.
"H4" (high speed position, four-wheel
drive): Lever at "H4"
Use this for normal driving on wet, icy or
snow-covered roads. This position pro-
vides greater traction than two-wheel
drive.
"N" (neutral position): Lever at "N"
No power is delivered to the wheels. The
vehicle must be stopped.
"L4" (Iow speed position, four-wheel
drive): Lever at "L4"
Use this for maximum power and traction.
Use "L4" for climbing or descending steep
hills, off-road driving, and hard pulling in
sand, mud or deep snow.
The four-wheel drive indicator light comes
on when the "H4", "N" or "L4" mode is
selected.
See "(c) Shifting procedure" for further
instructions.
(a) Four-wheel drive control
(lever/button type)
Use the four-wheel drive control lever
and "H4" button to select the following
transfer modes.
"H" (high speed position, two-wheel
drive): Lever at "H", "H4" button left out.
Use this for normal driving on dry hard-
surfaced roads. This position gives greater
economy, quietest ride and least wear.
"H4" (high speed position, four-wheel
drive): Lever at "H", "H4" button pushed
in.
Use this for normal driving on wet, icy or
snow-covered roads. This position pro-
vides greater traction than two-wheel
drive.
55