Toyota LAND CRUISER 78 series Owner's Manual page 128

c. Connect the clamp of the negative
(black) jumper cable to the negative
(-) terminal on the booster battery.
d. Connect the clamp at the other end
of the negative (black) jumper cable to
a solid, stationary, unpainted, metallic
point of the vehicle with the discharged
battery.
The recommended connecting points
are shown in the following illustrations:
Lt
CAUTION
Do not connect the cable to or near
any part that moves when the engine
is cranked.
When making the connections, to
avoid serious injury, do not lean over
the battery or accidentally let the
jumper cables or clamps touch any-
thing except the correct battery termi-
nals or the ground.
Connecting point for 1HZ engine
engine
@
Negative
terminal
("-" mark)
30030003
@
Jumper cable
Booster
battery
Discharged
battery
Connecting point for 1
HD-FTE
engine
121
c. Connect the clamp of the negative
(black) jumper cable to the negative
(-) terminal on the booster battery.
d. Connect the clamp at the other end
of the negative (black) jumper cable to
a solid, stationary, unpainted, metallic
point of the vehicle with the discharged
battery.
The recommended connecting points
are shown in the following illustrations:
Lt
CAUTION
Do not connect the cable to or near
any part that moves when the engine
is cranked.
When making the connections, to
avoid serious injury, do not lean over
the battery or accidentally let the
jumper cables or clamps touch any-
thing except the correct battery termi-
nals or the ground.
Connecting point for 1HZ engine
engine
@
Negative
terminal
("-" mark)
30030003
@
Jumper cable
Booster
battery
Discharged
battery
Connecting point for 1
HD-FTE
engine
121