Windshield Wipers And Washer - Toyota LAND CRUISER 78 series Owner's Manual

Wiridshield wipers and
washer (intermittent type A)
Windshield wipers and
washer (intermittent type B)
In cold weather, warm the windshield with
the defroster before using the washer.
This will help prevent icing, which could
block your vision.
NOTICE
Do not operate the wipers if the wind-
shield is dry. It may scratch the
glass.
Intermittent - '
operation
~
Slow
speed~
Fast speed \
14014
To turn the wipers on, move the lever.
To make the washer squirt, pUll the le-
ver toward you.
The key must be in the "ON" position.
The wipers will operate at intervals when
the lever is in the "INT" position.
Also, the wipers will automatically operate
a couple of times after the washer squirts
even with the lever in the "OFF" position.
If the washer does not work, check to see
whether the washer tank is empty. For
information on adding washer fluid, see
"Adding washer fluid" in Section 7-3.
To turn the wipers on, move the lever.
To make the washer squirt, push the
button on the end of the lever.
The key must be in the "ON" position.
The wipers will operate at intervals when
the lever is in the "INT" position. With the
lever in this position, the "INT TIME" band
lets you adjust the wiping time interval.
Twist the band upward to increase the
time between sweeps, and downward to
decrease it.
Also, the wipers will automatically operate
a couple of times after the washer squirts
even with the lever in the "OFF" position.
37
Wiridshield wipers and
washer (intermittent type A)
Windshield wipers and
washer (intermittent type B)
In cold weather, warm the windshield with
the defroster before using the washer.
This will help prevent icing, which could
block your vision.
NOTICE
Do not operate the wipers if the wind-
shield is dry. It may scratch the
glass.
Intermittent - '
operation
~
Slow
speed~
Fast speed \
14014
To turn the wipers on, move the lever.
To make the washer squirt, pUll the le-
ver toward you.
The key must be in the "ON" position.
The wipers will operate at intervals when
the lever is in the "INT" position.
Also, the wipers will automatically operate
a couple of times after the washer squirts
even with the lever in the "OFF" position.
If the washer does not work, check to see
whether the washer tank is empty. For
information on adding washer fluid, see
"Adding washer fluid" in Section 7-3.
To turn the wipers on, move the lever.
To make the washer squirt, push the
button on the end of the lever.
The key must be in the "ON" position.
The wipers will operate at intervals when
the lever is in the "INT" position. With the
lever in this position, the "INT TIME" band
lets you adjust the wiping time interval.
Twist the band upward to increase the
time between sweeps, and downward to
decrease it.
Also, the wipers will automatically operate
a couple of times after the washer squirts
even with the lever in the "OFF" position.
37