Checking The Serverboard Setup - Supero 1022GG-TF User Manual

A+ Server 1022GG-TF User's Manual
2-5

Checking the Serverboard Setup

After you install the server in the rack, you will need to open the unit to make sure
the serverboard is properly installed and all the connections have been made.
Removing the Chassis Cover (Figure 2-7)
1. Remove the three screws securing the top cover to the chassis.
2. Press both of the release tabs at the same time to release the cover
3. Slide the cover toward the rear of the chassis.
4. Lift the cover up and off of the chassis.
Warning: Except for short periods of time, do NOT operate the server
!
without the cover in place. The chassis cover must be in place to allow
proper airfl ow and prevent overheating.
1
1
1 2
Figure 2-7: Removing the Chassis Cover
4
1
1 1
3
1
1 2
2-10
1 1