Option
Advanced Boot Options
UEFI Boot Path Security
Date/Time
System configuration
Table 5. System Configuration
Option
Integrated NIC
SATA Operation
Drives
64
System Setup
Description
Allows you to Enable Legacy Option ROMs.
The options are:
•
Enable Legacy Option ROMs—Default
•
Enable Attempt Legacy Boot
Allows you to control whether the system prompts the user to
enter the Admin password when booting to a UEFI boot path.
Click one of the following options:
•
Always, Except Internal HDD—Default
•
Always
•
Never
Allows you to set the date and time. The change to the system date
and time takes effect immediately.
Description
This option allows pre-OS and early OS networking features to use
any enabled NICs.
•
Enabled UEFI Network Stack
This options allow you to configure the integrated network
controller.
Click one of the following options:
•
Disabled
•
Enabled
•
Enabled w/PXE—Default
Allows you to configure the operating mode of the integrated SATA
hard-drive controller.
Click one of the following options:
•
Disabled
•
AHCI
•
RAID On—Default
NOTE:
SATA is configured to support RAID
mode.
Allows you to enable or disable various drives on board.
The options are:
•
SATA-0
•
SATA–1
•
SATA–2
•
M.2 PCIe SSD-0