Solid state drive
Removing the SSD card
1
Follow the procedure in
2
Remove the :
a
base cover
b
battery
3
To remove the Solid State Drive (SSD) card:
a
Peel the adhesive mylar shield that secures the SSD card [1].
NOTE:
Need to be removed carefully in order to be reused on the replacement SSD.
b Remove the single (M2*3) screw that secures the SSD to the system [2].
c
Slide and lift the SSD from the system [3].
Installing the SSD card
1
Insert the SSD card into the connector on the system.
2
Replace the single (M2*3) screw that secures the SSD card to the system.
3
Place the Mylar shield over the SSD.
4
Install the :
Before working inside your
computer.
Removing and installing components
11