KoamTac KDC470 User Manual page 6

 SPP (Application Mode)
①. Scan the SPP & Pairing bar code on the quick manual provided with the scanner. If done
correctly, the LED light on the side of the scanner will blink red.
②. SPP & Pairing (Android/Windows) – 1D
③. SPP & Pairing (Android/Windows) – 2D
④. Navigate to the Bluetooth settings on the host device and turn Bluetooth on.
⑤. Underneath the list of available devices, tap on the KDC470. The serial number will
appear in brackets which you can cross check with the serial number on the back of the
KDC.
⑥. The KDC will pair to the phone, but needs to connect to an application to function
properly.
⑦. Download KTSync from the Play Store.
⑧. Open the Settings on the Android device. Navigate to Language & Input. Select Virtual
Keyboards. Then select Manage keyboards. Enable the KTSync Keyboard and allow for
any permissions.
⑨. Open KTSync and tap on the settings button on the top right of the screen.
⑩. Select Connect then select the KDC from the list of devices.
⑪. The KDC will connect. You can now scan within KTSync.
⑫. If you would like to scan outside of KTSync into another application, the KTSync software
keyboard must be selected. To switch software keyboards, tap inside of any text field.
Swipe down from the top of the device screen to bring up the notification panel. Select
the notification from the Android System to Select keyboard. Select the KTSync
keyboard. Now you can scan anywhere.
5