Table of Contents
Advertisement
46
CCM840/1640 Installer/User Guide
In the following example, there are spaces between BAUD, the equal sign and
the value 57600. Spaces are not permitted between keyword parameters and
their values.
> POR 2 SET BAUD = 57600 FLOW=XON
------------
ERR 26 - SET keyword parameter invalid
Syntax conventions
This manual uses the following command syntax conventions:
•
Brackets [ ] surround optional keywords and values.
•
Angle brackets < > surround user-supplied positional parameters and
keyword parameter values.
•
In most cases, choices are separated by a vertical bar |. The description
indicates if you may specify more than one of the choices and how to
separate multiple values. The exception is the Server SSH command. In
this case, the vertical bar is specifi ed on the command line when you
enable the "password or key" method (PW|KEY) or the "key or password"
method (KEY|PW).
Command Summary
The following table lists the CCM commands, including a brief description
plus the required access rights and level.
CCM Command Summary
Command
Connect
Disconnect
Help
Port Alert Add
Port Alert Copy
** Users who do not have the ADMIN or APPLIANCEADMIN level must have the appropriate
port access confi gured to issue this command.
Description, Access Right and Access Level
Accesses devices from the serial CLI port.
Access right: port-specifi c
Access level: ADMIN or APPLIANCEADMIN **
Ends a device session initiated with Connect command.
Access right: port-specifi c
Access level: ADMIN or APPLIANCEADMIN **
Displays information about commands.
Access right: none needed
Access level: all
Adds a port alert string.
Access right: SCON or PCON
Access level: ADMIN or APPLIANCEADMIN
Copies a port's alert strings to another port.
Access right: SCON or PCON
Access level: ADMIN or APPLIANCEADMIN
Advertisement
Table of Contents
